manualshive.com logo in svg

Toshiba Satellite Z930, Maintenance Manual

Share
Download
Toshiba Satellite Z930 Maintenance Manual Download Page 347

4  Replacement Procedures

 

4-64 

[CONFIDENTIAL] 

PORTÉGÉ Z930/Satellite Z930 Maintenance Manual (960-887) 

4.15  Wireless LAN antenna/3G antenna/Camera module 

Removing the Wireless LAN antenna/Bluetooth antenna/3G antenna 

To remove the wireless LAN antenna/Bluetooth antenna/3G antenna, follow the steps below 
and refer to Figure 4-30 and 4-31. 

1.

 

Peel off the insulator (INSU SQUARE) and turn up the 

insulators 

(INSU ANT LCD 

HLD).  

2.

 

Peel off the 

wireless LAN antennas/3G antennas

 from the LCD cover. 

3.

 

Disconnect the 

camera harness

 from the connector on the camera module. 

4.

 

Peel off the 

camera module

 from the slot of the LCD cover. 

5.

 

Peel off the 

camera harness

 from the LCD cover. 

NOTE:  Do not reuse the removed wireless LAN antennas, 3G antennas, camera module 

and camera harness. Be sure to use new wireless LAN antennas, 3G antennas, 
camera module and camera harness. 

Summary of Contents for Satellite Z930








































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands