Toshiba Satellite Z930 Maintenance Manual Download Page 249

Page: 249 / 423

Tests and Diagnostics

PORTÉGÉ Z930/Satellite Z930 Series Maintenance Manual (960-887)

[CONFIDENTIAL] 3-147

3.35.2.2 Diagnostics test menu

If you select [1] in the main menu, the following test screen is displayed.

Use the Up or Down cursor key to select your desired test item and press the [Enter] key.

[1] - [9]: Select the subtest menu described in section 4-2-3.
[88

］

: Specifies the number of error retries. {0 - 255}

[99]: Redisplays the main menu screen in section 4-2-1 (Pressing [Esc] is

also considered valid.)

If either test item of [5 - FLOPPY DISK TEST] or [8 - HARD DISK TEST] is executed from
the test menu, the following requirements have to be set.

1) FLLPPY DISK TEST
The following message will appear

Select the media mode and start track to be tested, then press Enter.

Summary of Contents for Satellite Z930








































































































































































































































































































































































































































Search results

Summary of Contents for Satellite Z930

Reviews:

Related manuals for Satellite Z930

Brands by name

Popular brands

Toshiba Satellite Z930, Maintenance Manual

Search results

Summary of Contents for Satellite Z930

Reviews:

Related manuals for Satellite Z930

Brands by name

Popular brands