Toshiba Satellite Z930 Maintenance Manual Download Page 111

Page: 111 / 423

Tests and Diagnostics

PORTÉGÉ Z930/Satellite Z930 Series Maintenance Manual (960-887)

[CONFIDENTIAL] 3-9



A USB cable (USB test)



LAN wraparound connector (LAN test)



RGB wraparound connector (Expansion test)



Module cable and RJ11 connector checker (Modem test)



Headphones (Sound test)



A microphone (Sound test)



A PC for wraparound test (Wireless LAN test/Bluetooth test/IEEE1394 test)



PC card wraparound connector (Expansion test) [Not necessary for this model)

3.1.2 H/W (Hardware) initial information setting tool

The H/W initial information setting tool consists of the following programs.



Initial configuration



DMI information save



DMI information recovery



System configuration display



E2PROM test (MAC/GUID/DMI)

You will need the following equipment to perform some of the programs.



The Diagnostics Disk (Main T&D)

3.1.3 Heatrun

test

program

The heatrun test starts automatically after the selection.

You will need the following equipment to perform this program.



The Diagnostics Disk (Main T&D)

Summary of Contents for Satellite Z930








































































































































































































































































































































































































































Search results

Summary of Contents for Satellite Z930

Reviews:

Related manuals for Satellite Z930

Brands by name

Popular brands

Toshiba Satellite Z930, Maintenance Manual

Search results

Summary of Contents for Satellite Z930

Reviews:

Related manuals for Satellite Z930

Brands by name

Popular brands