Toshiba Satellite Z930 Maintenance Manual Download Page 162

Page: 162 / 423

Tests and Diagnostics

3-60 [CONFIDENTIAL]) PORTÉGÉ Z930/Satellite Z930

Series Maintenance Manual (960-887)

3.24 Floppy Disk Drive Utilities

3.24.1 Function

Description

This function formats the FDD, copies the floppy disk and displays the dump list for both the
FDD and HDD.

FORMAT

NOTE: This program is only for testing a floppy disk drive. The option is different from

the Toshiba MS-DOS FORMAT command.

This program can format a floppy disk in the following formats:

(a)

2DD: Double-sided, double-density, double-track, 96/135 TPI, MFM mode,
512 bytes, 9 sectors/track.

(b)

2HD: Double-sided, high-density, double-track, 96/135 TPI, MFM mode, 512
bytes, 18 sectors/track.

COPY

This program copies data from a source floppy disk to a target floppy disk.

DUMP

This program displays the contents of the floppy disk and the designated sectors of
the hard disk on the display.

HDD ID READ

This program reads the hard disk ID and displays hard disk information.

Summary of Contents for Satellite Z930








































































































































































































































































































































































































































Search results

Summary of Contents for Satellite Z930

Reviews:

Brands by name

Popular brands

Toshiba Satellite Z930, Maintenance Manual

Search results

Summary of Contents for Satellite Z930

Reviews:

Brands by name

Popular brands