manualshive.com logo in svg

Toshiba Satellite Z930, Maintenance Manual

Share
Download
Toshiba Satellite Z930 Maintenance Manual Download Page 277

   

  Tests and Diagnostics  

 

 

PORTÉGÉ Z930/Satellite Z930 Series Maintenance Manual (960-887) 

[CONFIDENTIAL] 3-175 

6) Boot Media 
If the system is booted from the CD when both the CD and the USB memory that contain 
WinPE T&D are connected to the PC, T&D in the USB memory starts up. 
Also, when a bootable CD is not inserted in the CD drive when the system is booted from the 
USB memory, the ODD test fails with an error because the ODD test file is only contained in 
this CD. However, this error should be solved by inserting the bootable CD. 

7) Timer Test 
If the Timer test and other test are executed simultaneously (Multitasking), the error time 
displayed in the test log is not displayed correctly. 
 

8) CD Boot

 

After Winpe is selected on the Multiboot selection screen when the system is booted from the 
CD, the”Press any Key to boot from CD or DVD…” message is displayed but only the 
[ENTER] key is valid. 
 

3.37.3 Notices and Restrictions (Freedos) 

1) USB Boot 
If you boot the system from the USB memory, the FDD test cannot be executed. Use CD 
Boot. 
 

2) FDD Test 
If the USB FDD drive or the floppy disk on the disk drive is removed during an FDD test, a 
time-out error occurs and then the program hangs up. Do not remove the FDD drive or the 
floppy disk during the FDD test. 

 

 

Summary of Contents for Satellite Z930








































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands