19
Recor
ding
Pla
ybac
k
Editing
Librar
y
Function setup
Other
s
Intr
oduction
Dimming the display
Pressing the DIMMER button on the remote control changes the brightness of the display (normal/dimmed/off).
Switching the display
Every time you press the FL SELECT button, the display changes between the channel, title number, and time.
The display may not change, depending on the disc or recording conditions.
16 DUBBING indicator
Illuminates when copying.
17 Picture quality mode indicator
page 161
The current picture quality mode lights up.
The modes are: MN (Manual)/SP (Standard Play)/
LP (Long Play)/SP+LP+MN (Auto)
18 Title indicator
Illuminates when a title number is displayed.
19 TRK (Track) indicator
Illuminates when a track number is displayed.
20 Channel indicator
Displays the current channel or other numbers
such as a title number, track number, bit rate or
input selection.
21 Multi display
Displays the current time, elapsed time, remaining
time, starting time of programmed recording, chapter
number or message, etc
.
SAT indicator and channel selection
While the SAT indicator illuminates, you can select
channels of a connected satellite receiver from the
recorder.
(It is necessary to finish the connection and the
settings (
page 48, “INSTALLATION GUIDE”).)
Each time you press the SAT.CONT. button, the SAT
indicator turns on and off.
RD-XS34SB_Ope_E_p012-019
12/18/04, 5:41 PM
19