160
Operational settings
Operation beep
DVD-VIDEO
VCD
CD
DVD-R
DVD-RW
HDD
DVD-RAM
Turn on or off a confirmation beeper announcing when a
command is received.
Off:
Turns off the beep sound.
On:
Turns on the beep sound.
Note
• You cannot turn off beeps for alerts irrespective of this
setting.
Recording complete beep
DVD-R
DVD-RW
HDD
DVD-RAM
This is used to set whether or not a buzzer sounds when
dubbing and so forth is finished.
Off:
Buzzer does not sound.
On:
Buzzer sounds.
Note
• You cannot turn off beeps for alerts irrespective of this
setting.
IR Code
Switches the codes to operate the recorder. If you use
the second and third TOSHIBA HDD/DVD video
recorders, set the different remote codes for each
recorder to avoid confusion in the response of the
recorders.
For details about this setting, refer to “Operating the
second and third TOSHIBA HDD/DVD video recorders
with the remote control of this recorder” (
page 46,
“INSTALLATION GUIDE”).
DR 1 : DR 2 : DR 3
Instant skip interval
DVD-VIDEO
VCD
CD
DVD-R
DVD-RW
HDD
DVD-RAM
Sets how much time is skipped when the INSTANT SKIP
button is pressed.
5 sec. : 10 sec. : 30 sec. : 5 min.
Instant replay interval
DVD-VIDEO
VCD
CD
DVD-R
DVD-RW
HDD
DVD-RAM
Sets how far back is replayed when the INSTANT
REPLAY button is pressed.
5 sec. : 10 sec. : 30 sec. : 5 min.
Title thumbnail point
DVD-R
DVD-RW
HDD
DVD-RAM
For recorded titles, sets how far a scene from the start is
set as the title thumbnail.
0 sec. : 3 sec. : 10 sec. : 35 sec. : 1 min. : 5 min.
Note
• Thumbnails can also be changed to other scenes.
See
page 100.
HDD/RAM title play
HDD
DVD-RAM
Sets the resume play per title.
Title resume:
Remembers the point where you stop playback.
Allows you to resume the playback from that point.
Serial playback:
You can play back titles (Original, Playlist) stored in
the HDD or a DVD-RAM continuously.
Because there is no division between titles, the
recorder remembers only the last point where you
stopped playback.
Still group interval
DVD-RAM
Sets an interval for display of still pictures (in seconds)
when playing back a collection of still images.
1 sec. : 2 sec. : 3 sec. : 5 sec. : 10 sec. : Default
Priority Contents
To select the playback priority between JPEG (picture)
files and MP3/WMA (audio) files.
Photo
: JPEG files take priority over MP3/WMA files.
Audio
: MP3/WMA files take priority over JPEG files.
Notes
• If this selection does not correspond to disc contents, the
recorder will take a longer time to start playback of the
disc.
• To change this setting to a loaded disc, open the disc tray
after the setting, then close the disc tray to have the
recorder read the disc again.
Function Setup
Customizing the function settings (Continued)
RD-XS34SB_Ope_E_p149-164
12/18/04, 5:53 PM
160