– 122 –
2. How to confirm the central control address
(New function for AMT32E remote controller)
<Procedure> It can be confirmed even during operation or stopping.
1
Push
UNIT LOUVER
button for 4 seconds or more.
ò
2
In the frame at left side of the remote controller screen, the lighting set contents are
displayed.
During unset time,
''
(At shipment from factory) is displayed.
ò
3
After lighting display for 3 seconds, the display automatically disappears.
If any button is pushed during display, immediately the display disappears and then the pushed button is
displayed.
3. How to set contents of save operation
In combination with outdoor units before 4 series, the displayed setup value exchanges, but the real operation is
“75% fixed”.
1
Push
SAVE
for 4 seconds or more during stop of the operation.
•
flashes.
2
Push
UNIT
LOUVER
(At the left side of the button) and select the unit to be set.
• Every pushing the button, the unit No. changes.
The fan of the selected unit rotates and the louver swings.
Setup value at saving
UNIT No.
1–1
UNIT No.
1–2
UNIT No.
1–3
UNIT No. 1–4
3
Determine the capacity restricted value when pushing the save button of TIMER SET
/
.
• Every pushing the button, the capacity restricted value can be set at 1% interval in the range between
100% and 50%.
∗
The setting at shipment is 75%.
4
Push
SET
and then push
TEST
to finish the setup.
