Toshiba Portege 7140CT, User Manual

Page: 79 / 196

User's Manual Power and Power-Up Modes 6-11
Version
5
Last Saved on 20/12/99 04:11
Portege 7140CT User's Manual – 7140_UK.doc – ENGLISH – Printed on 20/12/99 as IM_714UK
3.
Press
Enter
. The computer displays the message below while it starts up.
Valid password entered, system is now starting up.
If you have set a password and the computer boots by the alarm Power
On function and
Resume
is on, the computer will start with the instant
security function enabled. The
password =
message is not displayed;
however, you must enter the password to use the computer.
If you enter the password incorrectly, a buzzer sounds.
If you enter the password incorrectly three times in a row, the computer
shuts off. In this case, you must turn the computer back on to retry
password entry.
If you forget the password, follow these steps:
1. Insert the password service diskette in the drive. See the Password
security section in Chapter 7, Setup and Password Security , for details
on how to create a password service diskette .
If the computer is in
Resume mode
, the password service diskette will not
work when you turn on the power. In this case, press the reset button.
Data saved with the Resume function will be lost.
2. Press
Enter
and the following message appears.
Set Password Again? (Y/N)
Press
Y
to run the TSETUP program and set a new password.
Press
N
to restart the computer.
The password service diskette must be inserted in drive A, otherwise the
display will return to
Password =
. If you have inserted the diskette in
drive A and the message still appears, the password service diskette is
faulty. In this case, contact your dealer.
The password service diskette will not work in Hibernation mode. In this
case, press the backspace key when you turn on the power. The
computer will start in boot mode.