Toshiba Portege 7140CT User Manual Download Page 47

Page: 47 / 196

User's Manual

Getting Started 3-7

Version

Last Saved on 20/12/99 04:11

Portege 7140CT User's Manual – 7140_UK.doc – ENGLISH – Printed on 20/12/99 as

IM_714UK

Using the 3 ½" external diskette drive

Use the 3 ½" external diskette drive to transfer data to and from the

computer system and to and from the hard disk.

The external diskette drive should be placed on a flat, horizontal surface

when in use. Do not set the drive on an incline greater than 20

while it is

operating.
Do not set anything on top of the diskette drive.
Hot docking is not supported for the diskette drive.

Connecting the 3 ½" diskette drive

To connect the drive, follow the steps below and refer to the following two

illustrations.

Save your data, shut down Windows and turn off the power.

Plug the connecting cable’s larger connector into the 3 ½" external

diskette drive’s socket. Press the latches on either side of the

connector when you plug in the connector.

Make sure the connector is right side up and properly aligned with the

socket. Do not try to force the connection, doing so can damage the

connecting pins.

Connecting the cable to the diskette drive

Open the cover of the 3 ½" diskette drive port.

Summary of Contents for Portege 7140CT





































































































































































































Search results

Summary of Contents for Portege 7140CT

Reviews:

Related manuals for Portege 7140CT

Brands by name

Popular brands

Toshiba Portege 7140CT, User Manual

Search results

Summary of Contents for Portege 7140CT

Reviews:

Related manuals for Portege 7140CT

Brands by name

Popular brands