Toshiba Portege 7140CT User Manual Download Page 4

Page: 4 / 196

User's Manual

Portege 7140CT User's Manual – 7140_UK.doc – ENGLISH – Printed on 20/12/99 as

IM_714UK

EU Declaration of Conformity

Toshiba declares, that this conforms to the following Standards:
“The product complies with the requirements of the Low Voltage Directive

73/23/EEC and the EMC Directive 89/336/EEC.”
This product carries the CE-Mark in accordance with the related European

Directives. CE-Marking is the responsibility of Toshiba Europe,

Hammfelddamm 8, 41460 Neuss, Germany.
The system has been tested by Toshiba using the YMark2000 test under

NSTL's self testing program and meets the NSTL test standards for

Year 2000 hardware compliance.
NSTL makes no recommendation or endorsement of any product. This

test data/report was prepared by Toshiba using licensed testing products

from NSTL. NSTL MAKES NO WARRANTIES, EXPRESS OR IMPLIED,

AS TO RESULTS TO BE OBTAINED BY ANY PERSON OR ENTITY

FROM USE OF THE SERVICES OR THE RESULTS THEREOF, OR ANY

INFORMATION OR DATA INCLUDED THEREIN.

Summary of Contents for Portege 7140CT





































































































































































































Search results

Summary of Contents for Portege 7140CT

Reviews:

Related manuals for Portege 7140CT

Brands by name

Popular brands

Toshiba Portege 7140CT, User Manual

Search results

Summary of Contents for Portege 7140CT

Reviews:

Related manuals for Portege 7140CT

Brands by name

Popular brands