5-18
October 2000 © TOSHIBA TEC
MR-3011/3012 DESCRIPTION OF OPERATION
(13) Start of transportation of next original
n
Original length sensor OFF
The read motor starts to rotate forward and rotates the read roller and exit roller to transport the next original
paused at the scanning position.
(The original is transported to determine its lengthwise size along the feeding direction.)
The original set signal is reset when the empty sensor is turned OFF.
(14) Original length sensor OFF (for next original)
n
Pre-reverse position for mixed sized originals
The read motor rotates for a certain number of pulses and stops after the original length sensor has been turned
OFF. (The trailing edge of the next original reaches the pre-reverse position.)
(15) Start of reverse operation for the next mixed sized original
n
Completion of reverse operation
The gate for the reverse path is switched after a certain period of time. The read motor starts to rotate in reverse
and rotates the read roller and exit roller in reverse to start the reverse operation.
The read motor rotates for a certain number of pulses and stops after the read sensor has been turned OFF.
#Chapter_05.p65
10/5/00, 9:55 AM
18