![background image](http://html.mh-extra.com/html/toshiba/mr-3011/mr-3011_service-manual_425140022.webp)
5-5
October 2000 © TOSHIBA TEC
MR-3011/3012 DESCRIPTION OF OPERATION
5.2
Duplex Feeding
(A4, reproduction ratio 100%)
(1) Setting original
The original is set on the tray and the empty sensor is turned ON.
The original set signal becomes ON.
(2) Start of pre-feeding operation
n
Completion of pre-feeding operation
A feed signal is sent from the main unit, and the feed motor starts to rotate forward and rotates the pickup roller
and feed roller to start the pre-feeding operation. After the registration sensor detected the leading edge of the
original, the feed motor transports the original for a certain number of pulses, performs registration and stops.
(3) Start of feeding operation
n
Original length sensor OFF
The feed motor starts to rotate in reverse and the read motor starts to rotate forward to start feeding the original
waiting in front of the registration roller and the read roller. The feed motor is stopped after the original length
sensor is turned OFF.
#Chapter_05.p65
10/5/00, 9:55 AM
5