5-8
October 2000 © TOSHIBA TEC
MR-3011/3012 DESCRIPTION OF OPERATION
(10) Start of back side scanning operation
n
Original passing reverse position
An original transport signal is sent from the main unit, and the read motor starts to rotate forward and reverse
motor starts its reverse rotation activated by read rotate in reverse to rotate the read roller, exit roller and reverse
roller. The reverse flapper is switched toward the reverse position by turning ON the reverse solenoid to start
scanning the back side of the original.
The reversal motor rotates for a certain number of pulses and stops after the trailing edge of the original has
passed the reverse roller.
(11) Original passing reverse position
n
Completion of back side scanning operation
The reversal motor starts to rotate forward and rotates the reverse roller to be ready for the leading edge of the
original to come into the reverse position.
The scanning operation for the back side of the original is completed when the trailing edge of the original has
passed the scanning position.
(12) Completion of transport operation for back side of original (original paused at reverse position)
The read motor and reverse motor are stopped after the reverse sensor is turned OFF to complete transporta-
tion of the back side of the original.
The reverse flapper is switched to the exit side by turning OFF the reverse solenoid.
#Chapter_05.p65
10/5/00, 9:55 AM
8
