5-17
October 2000 © TOSHIBA TEC
MR-3011/3012 DESCRIPTION OF OPERATION
(10) Completion of scanning operation
Scanning is completed when the trailing edge of the original has passed the scanning position.
(11) Exit sensor OFF
n
Start of feeding operation for next original
The feed motor starts to rotate in reverse after the exit sensor has been turned OFF and rotates the registration
roller to start feeding the next original waiting in front of the registration roller and read roller.
The original discharge operation is completed when the trailing edge of the original has passed the exit roller.
(12) Completion of feeding operation for next original
The feed motor stops and the read motor rotates for a certain number of pulses and stops when the read sensor
has been turned ON. (The leading edge of the next original reaches the pre-scanning position.)
#Chapter_05.p65
10/5/00, 9:55 AM
17