5-14
October 2000 © TOSHIBA TEC
MR-3011/3012 DESCRIPTION OF OPERATION
5.3
Single Side Feeding (for Mixed Sized Originals)
(Mixture of A4-R and FOLIO (LTR/LG), reproduction ratio 100%)
(1) Setting original
An original is set on the tray and the empty sensor is turned ON.
The original set signal becomes ON.
(2) Start of pre-feeding operation
n
Completion of pre-feeding operation
The feed signal is sent from the main unit, and the feed motor starts to rotate forward. The pickup roller and feed
roller are rotated to start the pre-feeding operation. After the registration sensor has detected the leading edge of
the original, the feed motor transports the original for a certain number of pulses, performs registration and
stops.
(3) Start of feeding operation
n
Completion of feeding operation
The feed motor starts to rotate in reverse and the read motor starts to rotate forward. The registration roller and
read roller, exit roller are rotated to start feeding the original waiting in front of the registration roller and read
roller.
The feed motor stops and the read motor rotates for a certain number of pulses and stops when the read sensor
is turned ON. (The leading edge of the original reaches the pre-scanning position)
#Chapter_05.p65
10/5/00, 9:55 AM
14