background image

Proof Sign-off:
T.Ichihashi
M.Miyazaki
K.Norum

R4C3900
Reference Guide

Rev. D

Front.fm

A5 size

7/12/00

R

Reference Guide

All rights reserved. No part of this publication may be reproduced, stored in a retrieval 
system, or transmitted in any form or by any means, mechanical, photocopying, recording, 
or otherwise, without the prior written permission of SEIKO EPSON CORPORATION. No 
patent liability is assumed with respect to the use of the information contained herein. Neither 
is any liability assumed for damages resulting from the use of the information contained 
herein.

Neither SEIKO EPSON CORPORATION nor its affiliates shall be liable to the purchaser of 
this product or third parties for damages, losses, costs, or expenses incurred by purchaser as 
a result of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, 
or alterations to this product, or (excluding the U.S.) failure to strictly comply with SEIKO 
EPSON corporation's operating and maintenance instructions.

SEIKO EPSON CORPORATION shall not be liable against any damages or problems arising 
from the use of any options or any consumable products other than those designated as 
Original EPSON Approved Products by SEIKO EPSON CORPORATION.

EPSON is a registered trademark of SEIKO EPSON CORPORATION.

General Notice:

 Other product names used herein are for identification purposes only and may be 

trademarks of their respective owners. EPSON disclaims any and all rights in those marks.

Copyright © 2000 by SEIKO EPSON CORPORATION, Nagano, Japan

Summary of Contents for Aculaser 8500








































































































































Reviews: