Toshiba MMY-MUP0801HT7JP, Service Manual

Page: 273 / 309

No. Part Work procedure Remarks
Heat
exchanger
WARNING
Wear a pair of gloves.
Otherwise, you will risk an injury involving a replacement
part or some other object.
1.
Detachment
1)
Remove No. 1. Cabinet, No.2. propeller fan/fan motor,
and No. 5. Reactor. (Only
1 4A
~24HP)
2)
Remove the discharge cabinet, motor base, beams in
four sides, and two rear supports.
<8 to 14HP(Fig.1)>
Discharge cabinet : Screws M5×10, 8 pcs
Motor base : M5×10, 4 pcs
Beams in four sides : M5×10, 21 pcs
Rear supports : M5×10, 6 pcs
<
1 4A
to 24HP(Fig.2 to 4)>
Discharge cabinet : M5×10, 12 pcs, M4×14, 2 pcs
Closing panel : M5×10, 3 pcs
Fixing board : M5×10, 3 pcs
Upper beams : M5×10, 2 pcs
Motor base : M5×10, 8 pcs
Beams in four sides : M5×10, 23 pcs
Rear supports : M5×10, 6 pcs
3
<8 to 14HP>
Fig. 1
<
1 4A
to 24HP>
Fig. 2
Fig. 3
Fig. 4
Discharge cabinet
M5×10, 8 pcs
Discharge cabinet
M5×14, Upper side: 2 pcs
M5×10, 6 pcs ×2
Fixing board
Support
Motor base
Closing panel
A beam on all sides
M5×10,
Closing panel: 3 pcs
Fixing board: 4 pcs
Upside beam: 2 pcs
Motor base: 8 pcs
M5×10,
Back beam: 8 pcs
Left / Right beam: 7 pcs×2
M5×10
Rear: 2 pcs
Side: 1 pcs
Fig. 5
- 273 -