Toshiba Magnia 3135R, User Manual

Page: 67 / 227

Connecting Hardware Devices
CPU Modules
67
Removing a Processor
1 Observe the safety and ESD precautions at the beginning of this chapter and the
additional cautions given here. If the processor has a fan heat sink, disconnect the
power wire from the connector on the server board.
2 As you work, place boards and processors on a grounded, static free surface or
conductive foam pad.
3 Unplug the heat sink fan.
4 Detach the heat sink clip and remove the heatsink from the processor.
5 Raise the socket locking lever and remove the processor.
6 Place the processor in a piece of conductive foam and store in an anti-static
package.
7 Replace the terminator.
Replacing the terminator