Toshiba Magnia 3135R, User Manual

Page: 69 / 227

Connecting Hardware Devices
Internal Battery
69
4 Set any jumpers and/or switches on the drive according to the drive manufacturer’s
instructions.
5 Align the drive holes (Step 5) to the holes in the drive carrier slide track (C), insert
the screws that you previously removed (Step 2), and attach the carrier (B) to the
drive (A). Make sure that the connector end of the drive (E) is facing the back of the
carrier and the drive top is facing upward before inserting the screws.
Step 5: Attaching the drive to the carrier
6 Slide the carrier/drive into the server chassis with the retention mechanism extended
in the open position, then push the arm toward the front of the chassis until the lever
tab clicks and the chassis slot indicating that it is closed.
Step 6: Inserting the carrier/drive into the drive bays
Internal Battery
The lithium battery on the server board powers the real time clock (RTC) for up to 10
years in the absence of power. When the battery starts to weaken, it loses voltage, and
C
A
E
B
D