System Configuration Setup
BIOS Setup Utility
84
What appears on the screen after this depends on whether you have an operating
system (OS) loaded and, if so, which one. If the system halts before POST has
completed running, the system beeps indicating a fatal system error that requires
immediate attention.
If POST can display a message on the screen, the system beeps twice as the
message appears.
BIOS Setup Utility
The BIOS Setup Utility is a menu-driven utility program that allows you to view and
change basic motherboard settings.
Starting the BIOS Setup Utility
The BIOS screen appears when you start the server.
To start the BIOS Setup Utility, press the F2 key immediately after the BIOS screen
appears. The message “Entering Setup...” appears on the screen. After the system
completes the Power-On-Self-Test (POST), the BIOS Setup Utility is loaded.
If F2 is not pressed, the operating system is loaded after the Power-On-Self-Test (POST)
sequence is completed.
Phoenix BIOS 4.0 Release 6.0
Copyright 1985-2000 Phoenix Technologies
Ltd., All Rights Reserved
STL20+0.86B.XXXX.XXX.XXXXXXXXXX
STL2+ Production Release XX.X
Intel(R) Pentium (R) III Processor XXX MHz
XXXXXXXX Extended Memory ECC Initialized
XXXXXXXX Extended Memory Passed
0256K Cache SRAM Passed
System BIOS Shadowed
Video BIOS Shadowed
UMB upper limit segment address : XXXX
Keyboard Detected
Mouse initialized
Press <F2> to enter SETUP
Summary of Contents for Magnia 3135R
Page 1: ......
Page 172: ...172 Pin Signal 1 GND 2 12V 3 Fan sensor ...
Page 221: ...221 ...
Page 227: ...227 ...