Software Installation
Windows NT Server 4.0
145
5
When a list of drivers appears on the screen, select "
MEGARAID NT 4.0 RAID
Driver
".
6
Follow the screen prompts to finish the installation.
RAID Controller
To select the driver for the optional MegaRAID adapter card:
1
Select
S=Specify Additional Device
.
2
Select
Other (disk provided by hardware manufacturer necessary)
.
3
Insert the diskette labeled
AMI Drivers & Utilities
into the diskette drive and press
enter.
4
When a list of drivers appears on the screen, select MegaRAID NT SCSI Driver.
5
Follow the on-screen instructions to complete the installation.
Onboard Network Adapter
To install the onboard network adapter:
1
At the Installing Windows NT Networking menu, select
Wired to the Network
.
2
Select
Next
.
3
Choose
IIS or Not
.
4
Select
Start Search
where NT will find an Intel 82557 driver (this driver does not
work and must be replaced).
5
Unselect it and click on
Select from List
.
6
From the driver selection menu, select
Have Disk
.
7
Insert the diskette labeled
Intel EtherExpress Pro 100+ Server Adapter Drivers
(v3.1)
into the diskette drive and press Enter.
NOTE: If the RAID Controller is installed on the server, be sure to install the Power
Console Plus application after installing Windows NT Server 4.0. For more detailed
information see the RAID Controller user's guide.
TECHNICAL NOTE: A RAID management utility, Power Console Plus needs to be
installed and is included on the
Magnia 3135R Software and Documentation CD
.
For installation and usage details, refer to the
MegaRAID User’s Manual
.
Summary of Contents for Magnia 3135R
Page 1: ......
Page 172: ...172 Pin Signal 1 GND 2 12V 3 Fan sensor ...
Page 221: ...221 ...
Page 227: ...227 ...