Toshiba Magnia 3135R, User Manual

Page: 94 / 227

System Configuration Setup
Using the Adaptec SCSI Utility
94
Using the Adaptec SCSI Utility
The onboard SCSI controller and any preinstalled SCSI devices are set up prior to
shipping. Use the Onboard SCSI Utility when you add or replace a SCSI device in the
device bay or need to confirm its configuration settings.
Starting the SCSI Utility
When the server is turned on or restarted, the monitor displays the onboard SCSI BIOS
initialize message shown below. The display differs based on the type of SCSI device
installed in the server.
When the settings are correct, the SCSI ID and device name of the SCSI device
connected to the onboard SCSI controller appear on the screen. To start the SCSI Utility,
after the message “Press <Ctrl>+<A> for SCSI Select (TM) Utility!” appears on the
screen, press the <Ctrl>+<A> keys.
Menu Configuration
When the SCSI Utility starts, the monitor enters the following main menu display mode:
Adaptec AIC-7899 SCSI BIOS vX.XX
(C)1998 Adaptec, Inc. All Rights Reserved.
<<Press <Ctrl> <A> for SCSISelect(TM)
Utility!>>>
Ch A, SCSI ID : 0
IBM DDYS-T36950M ULTRA2-LVD
SCSI ID : 6
TOSHIBA SMC3.0 ULTRA2-LVD
Ch B, SCSI ID : X XXXXXXX
Adaptec AIC-7896 < SCSISelect (TM) > Utility vX.XX
You have an AIC-7899
SCSI host adapter in your system. Move
the cursor to the bus : device: channel of
the one to be configured and
press <Enter>.
<F5>-Toggle color/monochrome
00:04:A
00:04:B
Arrow keys to move cursor, <Enter> to select option,
<Esc> to exit (*=default)