82
Chapter 3
System Configuration
Setup
This chapter describes the Power-On Self Test (POST) and server configuration utilities.
The table below describes each of the utilities.
Hot Keys
Utility
Description and brief procedure
Page
BIOS Setup
If the system does not have a diskette drive, or if the
drive is disabled or misconfigured, use Setup to enable
it. Or, you can move the CMOS jumper on the server
board from the default setting (protect CMOS memory)
to the Clear setting; this will allow most server
configurations to boot.
84
BIOS Update Utility
Use to update the BIOS or recover from a corrupted
BIOS update.
93
Using the Adaptec
SCSI Utility
Use to configure or view the settings of the SCSI host
adapters and onboard SCSI devices in the server.
94
To do this
Press these keys
Clear memory and reload the operating
system
this is a system reset
<Ctrl+Alt+Del>
Secure the system immediately
<Ctrl+Alt>+hot key (Set the hot-key combination
with the BIOS System Setup Utility.)
Summary of Contents for Magnia 3135R
Page 1: ......
Page 172: ...172 Pin Signal 1 GND 2 12V 3 Fan sensor ...
Page 221: ...221 ...
Page 227: ...227 ...