Getting Started
Power Requirements
21
Environmental Considerations for Rack Mount Models
In addition to the general environmental considerations, keep these additional points in
mind:
❖
Use the optional Toshiba rack and rack mounting kit to install a rack model server.
❖
Provide sufficient airflow to the server to maintain proper cooling. Allow 51 inches
(130 cm) of clearance in front of, and 24 inches (60 cm) behind the rack.
For more information on environmental considerations for a rack-mounted server, see
Environmental Considerations
on page 34 and
Selecting a Location for the Server in the
Rack
on page 36.
Power Requirements
The power supply unit has maximum current ratings of 4.6 amperes with input voltages
of 100-200 volts (at 50/60 Hz), or 2.3 amperes with input voltages of 200-240 volts (at 50/
60 Hz), with 10 amp over-current protective circuits.
Before plugging the power cable into a wall outlet, make sure that the AC power source
and the over-current protector (circuit breaker current rating) are sufficient to handle the
requirements of the server and its connected peripheral devices.
The current rating of the server is 4 amps. To ensure a continuous supply of power to the
server, Toshiba recommends the use of an uninterruptible power supply (UPS).
If you have questions about the wiring of your AC power source, consult an authorized
Toshiba Magnia service provider.
NOTE: Installing a Toshiba Magnia 3135R in a rack requires special knowledge and
skills. Toshiba recommends that you contact an authorized Toshiba Magnia service
provider.
WARNING: To ensure proper grounding of the server and avoid a possible fire
hazard, use the power cable provided with the server.
Summary of Contents for Magnia 3135R
Page 1: ......
Page 172: ...172 Pin Signal 1 GND 2 12V 3 Fan sensor ...
Page 221: ...221 ...
Page 227: ...227 ...