Software Installation
Windows NT Server 4.0
144
You can install Windows NT Server 4.0 from a Windows 4.0 NT diskette set or the
Microsoft CD-ROM using
F6
(the preferred method) when "
Setup is inspecting your
computer’s hardware configuration
" is displayed. Please refer to the installation
documentation for details.
Installing Drivers
Prepare the following disks:
ADA02.img = Adaptec 7899 NT/9x
AMINT.img = MegaRAID Drivers & Utilities NT 4.0
INT02.img = Intel Pro/100 NT
The following information is from screens displayed when you press
F6
during the CD-
ROM boot process and you have created the appropriate driver diskettes.
Onboard SCSI Controller
To select the driver for the onboard SCSI controller:
1
Select
S=Specify Additional Device
.
2
Select
Other (disk provided by hardware maker necessary)
.
3
Insert the diskette labeled
Adaptec 7899 Family Manager Set (NT 4.0)
into the
diskette drive, and press Enter.
4
When a list of drivers appears on the screen, select
Adaptec Ultra160 Family PCI
SCSI Controller (NT 4.0)
.
5
Continue the installation as instructed on the screen.
Express 500 RAID Controller
To select the driver for the RAID controller:
1
Press F6 when the following message appears on the DOS screen: "Setup is
inspecting your computer's hardware configuration."
2
When the message "Specify additional SCSI adapters" is displayed, elect
S=Specify Additional Device
.
3
Select
Other
.
4
Insert the diskette labeled "MegaRAID NT" (supplied with the RAID Controller or
created from the Create Floppy Disks utility) and press Enter.
Summary of Contents for Magnia 3135R
Page 1: ......
Page 172: ...172 Pin Signal 1 GND 2 12V 3 Fan sensor ...
Page 221: ...221 ...
Page 227: ...227 ...