manualshive.com logo in svg

Toshiba e-STUDIO2010AC, Imaging Manual

Share
Download
Toshiba e-STUDIO2010AC Imaging Manual Download Page 55

 © 2018 TOSHIBA TEC CORPORATION All rights reserved

e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC

2-1

2. Copier-specific Adjustments

2.1

To Make Copy Suitable for the Original

Explanation

Selecting an appropriate mode matching to images on the original allows printing them in the best 
suitable condition.

Procedures

Both the service technician and the user can perform steps (1) and (2).

(1) Select the color mode.

Switch the color mode in the [Basic] tab and change the settings in the [Image] tab to make them 
suited to the color of the original.

*1: These modes bring a good effect if the number of colors used in the originals is small or black is 

used in most parts of the originals.

*2: Press [Mono Color] in the image menu of the touch panel.
*3: Press [Twincolor Copy] in the image menu of the touch panel.

Color mode

Explanation

Full-color original

Black-and-white 

original

Auto Color

Automatically judges the type of each 
color on originals. Full-color originals are 
copied in the full color mode and black-
and-white originals are copied in the 
black mode.

Yes

Yes

Full color

Originals are copied in the full color 
mode.

Yes

Black

Originals are copied in the black mode.

Yes

Mono Color *2

Use this to copy originals in a single 
color except black.

Yes

Twincolor Copy *3

(Twincolor 

Selectable)

The black part and the parts other than 
black in the originals are copied in 2 
specified colors.

Yes

*1

Twincolor Copy *3

(Red & Black)

The red part in the originals is copied in 
red and the parts other than red are 
copied in black and white.

Yes

*1

Summary of Contents for e-STUDIO2010AC





















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands