manualshive.com logo in svg

Toshiba e-STUDIO2010AC, Imaging Manual

Share
Download
Toshiba e-STUDIO2010AC Imaging Manual Download Page 210

3.Printer-specific Adjustments

e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC

 © 2018 TOSHIBA TEC CORPORATION All rights reserved

3-50

3.4.4

To Use Only the Black Toner to Reproduce Gray Areas
(To use only the black toner to reproduce black-and-white photos or 
gradational images)

Explanation

For printing, only the K toner is usually used to reproduce gray areas of drawing data, lines and text. On 
the other hand, all color toners (C, M, Y and K) are used to reproduce gray areas of image data, such as 
BMP, GIF, JPEG and TIFF. This provides a deeper gray on the printouts.
The following are examples when image data are reproduced using C, M, Y and K:

• A gray-scale or black-and-white photo is pasted in photo editing software such as Imaging and Paint 

Shop Pro, in Internet Explorer, word-processing or spreadsheet software.

• A semi-transparent gray color or gradient of gray is used in the Format AutoShape dialog box on 

Microsoft Office.
(The gray area printed out as raster data in the same manner as a photo image is reproduced using C, 
M and Y toners, or C, M, Y and K toners.)

Change the option on the printer driver, in order to use only the black toner to reproduce the gray area 
where C, M, Y and K are used as described above.

Procedures

(1) Perform PureBlack/Gray threshold value adjustment.

For details of the adjustment procedure, refer to "3.1.2  PureBlack/Gray Threshold Value 
Adjustment".

Caution after the adjustment

Nothing in particular

Before adjustment

After adjustment

Using all color toners to reproduce black-
and-white photo images (bitmap data) 
blends undesired colors in the image.

Using only the black toner to reproduce 
black-and-white photo images can 
diminish undesired colors.

Photo area

Text area

Photo area

Text area

Summary of Contents for e-STUDIO2010AC





















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands