151
5.1.7.
F8 Mode: Service Adjustment
Set the machine to Service Mode and press "8" key on the Keypad.
↓
Press the "START" key.
↓
Enter the desired code number or press “V”, ”/\” arrow keys.
↓
If you wish to select another code number, scroll the menu with the arrow keys.
↓
Press the "SET" key.
↓
Enter the desired function code number and press “SET” key.
↓
When the “CLEAR” key is pressed, the selected code input will not be accepted.
↓
Press “STOP” key, then press “FUNCTION” and “CLEAR” keys sequentially to exit the service mode.
↓
Reboot the machine after setting the parameter(s) to activate the setting(s).
31
Not Used
32
FLS / LG Count
Total count of FLS / Legal Print.
99
All Counter Clear
All counters are cleared.
F8 Mode
No.
Item
Remarks
00-05 Not Used
06
Error Log View
a) Each time the arrow key is pressed, the machine
errors or paper jam codes stored in memory are
displayed, beginning with the oldest code.
Note:
Only the 30 most recent codes are displayed.
07
Error Log Clear
a) Press the Reset key.
A Message "Error code can be cleared with the
Start key" is displayed on the LCD.*
b) Press the Start key.
08-17 Not Used
18
C18 PRT PWM ADJ.PTN.
(LSU PWM Pattern)
Print out the Test Pattern.
Proceed when the LSU is replaced.
19-46 Not Used
47
C47 ADF Scan Test
Place the document on the ADF first.
Press START key to begin.
48-54 Not Used
F7 Mode
No.
Item
Remarks
Summary of Contents for e-STUDIO190F
