176
5.2.6.
Fax Service Mode 6 (RAM Initialization)
Initializes RAM and restores the Function Parameters to their default values.
Note:
This operation should be performed when the unit is first installed.
Press the “V”, ”/\” arrow keys to select the "6: RAM initialize" on the display.
↓
Press the “SET” key to select the desired Mode number.
↓
Press the "SET" key to initialize RAM.
↓
Press the “STOP” key twice to exit the service mode.
RAM Initialization Table
No.
Initialize Mode
Description
01
PARAMETER INITIALIZE
Restores the Fax and Function Parameters to default
values.
Note:
Turn the Power Switch to the
OFF
and back to the
ON
position to enable the parameter settings.
02
JOURNAL CLEAR
Clears the Journal contents.
03
AUTO DIAL CLEAR
Clears the One-touch, ABBR Numbers and Phone Books.
04
PROGRAM DIAL CLEAR
Clears the Program keys.
05
LOGO/ID/PSWD CLEAR
Clears the Logo, ID, Polling Password.
06
LBP ERROR LOG CLEAR
Clears the Printer Error Log.
07
SHIPMENT SET
Deletes all setting information, except parameter number
80 and 81, then set default values.
08
FLASH MEMORY CLEAR
Deletes all information in the Flash Memory.
09
ALL JOB CLEAR
Clears all Jobs stored in Flash Memory.
Summary of Contents for e-STUDIO190F
