Toshiba e-STUDIO190F, Service Manual

Page: 137 / 299

137
4.10.3. Error Message Appears on the PC
4.10.4. Error Message Appears on the Unit
4.10.5. System Error (CD Drive Related Error During Installation)
Error Message Possible Solution(s)
Network Print DLL Error. • Check if the Toshiba Device is turned "On", and the 10Base-T /
100Base-TX cable is properly connected.
• Printer Properties may be incorrectly configured. (i.e. Printer Port)
Network Port is Busy. • The Toshiba Device may be processing someonefs print job,
please wait, and try again later.
• The Toshiba Device is either Transmitting or Receiving an email.
Cannot print because an error is
found in the current printer
setting. • Verify and specify the paper size or orientation to coincide with the
application and the printer driver settings.
Error Message Possible Solution(s)
• The available Sort Memory in the Toshiba Device may not be
enough to complete the print job.
Either install an optional Sort Memory or change the
resolution to 300 dpi in the Printer Driver Properties dialog box.
• The print settings may not be matched for the system.
Change the printing settings in the Printer Driver Properties
dialog box.
i.e. Multi-sized printing.
Cannot complete print job
Image memory overflow
Cannot print
System error
Cannot complete
Confirm print condition
• Change the resolution to 300 dpi in the Printer Driver properties
dialog box.
Problem Possible Solution(s)
Cannot read the drive. • Insert the CD into the drive and click “Retry”.