Toshiba e-STUDIO165, Service Manual

Page: 133 / 313

© 2006 - 2008 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO165/167/205/207/237
ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 111
2
2.2.10 FUNCTION (Jam counter ROM ver.)
Press the USER FUNCTIONS key and enter the SERVICE MODE. Then, select LISTS and print a
function list so that the user set information will be printed on the first sheet, and the jam counter on the
second sheet.
The same data as printed in Chap. 2.2.9 [C] is printed on the third and fourth sheets.
Fig. 2-29
Print Data (PAGE:002)
JAM COUNTER Jam information
DOCUMENT Jammed original count
PAPER Total count of TYPE1 to 7
TYPE1 JAM Jam inside the equipment (at or near the paper feeding section)
TYPE2 JAM Jam inside the equipment (at or near the center section)
TYPE3 JAM Jam inside the equipment (at or near the paper exit section)
TYPE4 JAM Jam at the option (paper feed)
TYPE5 JAM Jam between the option and the equipment (at the transport path)
TYPE6 JAM Cover open jam (during copying)
TYPE7 JAM Other paper jams
FLASH ROM Version information
PROGRAM System firmware version <T28xSY0xxxx> and creation date
FUNCTION Function table data version <T28xSY1xxxx> and creation date
LANGUAGE Language data version <T28xSY2xxxx> and creation date
SCANNER Scanner (ADF/RADF) version <Vxxxx>
USER FUNCTION
<Key used in operation> <Display messages>
Select menu
Enter SERVICE MODE
Press the
USER FUNCTION key
02.LISTS
2.FUNCTION
ENTER
Use or keys
ENTER
Print list