Toshiba E-studio 477s User'S Manual And Troubleshooting Manual Download Page 47

Page: 47 / 86

CHECKING THE EQUIPMENT STATUS WITH TopAccess

- 47 -

Staples Empty

This icon indicates no staples are left in the Finisher.

Call for Service

Contact your dealer to have the equipment inspected.

Error Messages

When a message appears on the [Device] Tab of TopAccess, see the table below for the corrective action.

TopAccess Message

Corrective Action

Cover Open - Please Close Cover.

Close the front cover.

Paper Feeding Cover Open - Please Close Cover.

Close the paper feeder cover.

Transfer/Transport unit Cover Open - Please Close Cover.

Close the transfer/transport unit.

Bypass Cover Open - Please Close Cover.

Close the bypass cover.

Exit Cover Open - Please Close Cover.

Close the exit cover.

Toner Cover Open - Please Close Cover.

Close the toner cover.

Platen Cover Open - Please Close Cover.

Close the platen cover.

Drawer 1 Open - Please Close Drawer 1.

Close the drawer.

Drawer 2 Open - Please Close Drawer 2.

Close the drawer.

Drawer 3 Open - Please Close Drawer 3.

Close the drawer.

Drawer 4 Open - Please Close Drawer 4.

Close the drawer.

Automatic Duplexing Unit Cover Open - Please Close Cover.

Close the automatic duplexing unit cover.

Standard Output Tray Paper Full - Please Remove Paper.

Remove the paper from the tray.

Upper Tray Paper Full - Please Remove Paper.

Remove the paper from the tray.

Paper Empty in Drawer 1 - Please Add Paper.

Set the paper in the drawer.

Paper Empty in Drawer 2 - Please Add Paper.

Set the paper in the drawer.

Paper Empty in Drawer 3 - Please Add Paper.

Set the paper in the drawer.

Paper Empty in Drawer 4 - Please Add Paper.

Set the paper in the drawer.

Paper Misfeed in Job Separator - Please Clear Paper Path.

Refer to the guidance on the touch panel to remove misfed paper.

Paper Misfeed in Automatic Duplexing Unit - Please Clear Paper Path.

Refer to the guidance on the touch panel to remove misfed paper.

Paper Insertion Misfeed - Please Clear Paper Path.

Refer to the guidance on the touch panel to remove misfed paper.

Paper Misfeed in Printer - Please Clear Paper Path.

Refer to the guidance on the touch panel to remove misfed paper.

Paper Misfeed in Finisher - Please Clear Paper Path.

Remove the misfed paper from the Finisher.



P.14 "When Paper Jam Occurs in Inner Finisher (Option)"

Staple Empty - Please Set Staple Cartridge

Refill the Finisher staples.

Open the front cover, and clean the slit glass.

Clean the slit glass.

Toner Not Recognized - Please Check Toner.

Check and adjust the toner bottle.

Black Toner Empty - Please Install New Toner Cartridge.

Replace the black toner.



P.58 "Replacing Consumables / Maintenance Units"

Black Toner Near Empty - Please Prepare New Toner Cartridge.

Prepare the new toner cartridge.

Close duplexing unit cover

Close the duplexing unit cover.

Fatal Error - Please Contact Service Technician.

Contact your dealer.

Main Motor Error - Please Contact Service Technician.

Contact your dealer.

Printer Input Error.

Contact your dealer.

Scanner Error - Please Contact Service Technician.

Contact your dealer.

Fuser Error - Please Contact Service Technician.

Contact your dealer.

Summary of Contents for E-studio 477s






















































































Search results

Summary of Contents for E-studio 477s

Reviews:

Related manuals for E-studio 477s

Brands by name

Popular brands

Toshiba E-studio 477s, User'S Manual And Troubleshooting Manual

Search results

Summary of Contents for E-studio 477s

Reviews:

Related manuals for E-studio 477s

Brands by name

Popular brands