Toshiba E-studio 477s User'S Manual And Troubleshooting Manual Download Page 69

Page: 69 / 86

Maintenance

- 69 -

●

Maintenance

Cleaning the Surface of the Machine

Note

• Do not use benzene or paint thinners. They may damage

plastic parts or paint.

Turn OFF the power to the machine.

Note

• Do not turn off the device abruptly. It can cause

malfunctions.

(1)

Press the [ON/OFF] button until a "pip"
sound is heard.

(2)

"Shutdown is in progress." appears for a
while, and then the power is turned OFF.

(3)

Turn the power switch OFF.

Clean the surface of the machine.

Note

• Do not use anything except water or a mild detergent.
• There is no need to oil or lubricate parts of the

machine.

(1)

Clean the surface of the machine with a
soft cloth moistened with water or a neutral
detergent.

(2)

Dry the surface of the machine with a soft,
dry cloth.

Cleaning the platen (glass surface)

If the platen (glass surface) is dirty, black specks or streaks
may appear on your copies and prints, as well as on
documents you send to others. To maintain print quality, clean
the platen once a month.

Note

• Do not use benzene or paint thinners. They may damage

plastic parts or paint.

Open the document holder cover.

Clean the platen (glass surface) and paper
holder with a soft, damp cloth.

Close the document holder cover.

Memo

• If the platen is heavily soiled, clean with a small amount of

neutral detergent, then wipe with a soft, damp cloth.

Document holder
cover

Glass surface

Paper holder

Summary of Contents for E-studio 477s






















































































Search results

Summary of Contents for E-studio 477s

Reviews:

Related manuals for E-studio 477s

Brands by name

Popular brands

Toshiba E-studio 477s, User'S Manual And Troubleshooting Manual

Search results

Summary of Contents for E-studio 477s

Reviews:

Related manuals for E-studio 477s

Brands by name

Popular brands