Toshiba E-studio 477s User'S Manual And Troubleshooting Manual Download

Page: 7 / 86

When a Paper Jam Occurs

- 7 -

When loading paper in the bypass tray, lift
the paper set cover and set the paper with
the print side face up.

Lower the paper set cover.

This completes the procedure.

When Paper Jam Occurs Inside the
Machine

Insert your finger into the recess on the
right side of the machine and pull the front
cover open lever to open the front cover
forward.

Note

• Open the front cover gently. If you open it rapidly, the

bypass tray may open.

Pull out the duplex unit by holding the
grips on its both sides.

Open the upper cover of the duplex unit
and check for jammed paper in the duplex
unit. If jammed paper remains, pull it out
gently. Then, close the upper cover.

If there is no jammed paper in the duplex unit, check the
image drum section.



P.10 "When Paper Jam Occurs Around the Fuser

Unit"

Return the duplex unit to its original
position.

Paper set cover

Front cover

Front cover
open lever

Grip

Duplex unit

Grip

Upper cover

Duplex unit

Summary of Contents for E-studio 477s






















































































Search results

Summary of Contents for E-studio 477s

Reviews:

Related manuals for E-studio 477s

Brands by name

Popular brands

Toshiba E-studio 477s, User'S Manual And Troubleshooting Manual

Search results

Summary of Contents for E-studio 477s

Reviews:

Related manuals for E-studio 477s

Brands by name

Popular brands