Toshiba E-studio 477s User'S Manual And Troubleshooting Manual Download Page 12

Page: 12 / 86

When a Paper Jam Occurs

- 12 -

Close the top cover.

Note

• You can close the top cover smoothly if you close the

front cover halfway. Be careful not to let the front cover
return to its open position.

Close the front cover.

Note

• The front cover cannot be closed if the top cover is not

closed securely.

Return the document holder to its original
position.

This completes the procedure.

Paper Jam on Both Sides of the Printer
Unit

There is a paper jam near the duplex unit.

Open the rear cover by pulling the lock
lever at the center of the back side of the
machine toward you.

Check for jammed paper inside the
machine. If jammed paper remains, remove
it.

Return the rear guide to its original position
then close the rear cover.

Top cover

Front cover

Lock lever

Rear cover

Rear guide

Summary of Contents for E-studio 477s






















































































Search results

Summary of Contents for E-studio 477s

Reviews:

Related manuals for E-studio 477s

Brands by name

Popular brands

Toshiba E-studio 477s, User'S Manual And Troubleshooting Manual

Search results

Summary of Contents for E-studio 477s

Reviews:

Related manuals for E-studio 477s

Brands by name

Popular brands