Toshiba E-studio 477s User'S Manual And Troubleshooting Manual Download Page 78

Page: 78 / 86

Moving or Transporting the Machine

- 78 -

Attach the stopper release to the fuser unit.

Attach the orange stopper release in the direction of the

arrow while pressing the blue lever of the fuser unit
down in the direction of the arrow .

Close the top cover and return the
document holder to its original position.

Return the bagged image drum and print
cartridge into the machine.

Close the front cover.

Note

• The front cover cannot be closed if the top cover is not

closed securely.

Separate the main printer unit from any
additional drawer units.

If there are no additional drawer units, proceed to step 10.
The separation procedure is the exact opposite of
installation. For more information, refer to the

Setup

Guide

Protect the machine with cushioning
material.

Note

• Use the original box, packaging, and cushioning

material that came with your machine at the time of
purchase.

Memo

• When setting up the machine again after transport, be

sure to remove the tape from each of the image drum
and toner cartridge.

Orange stopper

Blue lever

Orange stopper

Top Cover

Document
holder

Front Cover

Summary of Contents for E-studio 477s






















































































Search results

Summary of Contents for E-studio 477s

Reviews:

Related manuals for E-studio 477s

Brands by name

Popular brands

Toshiba E-studio 477s, User'S Manual And Troubleshooting Manual

Search results

Summary of Contents for E-studio 477s

Reviews:

Related manuals for E-studio 477s

Brands by name

Popular brands