Toshiba E-studio 477s User'S Manual And Troubleshooting Manual Download Page 8

Page: 8 / 86

When a Paper Jam Occurs

- 8 -

Close the front cover.

This completes the procedure.

When Paper Jam Occurs Under the
Image Drum

Hold the Document holder lever and lift the
Document holder.

Insert your finger into the recess on the
right side of the machine and pull the front
cover open lever to open the front cover

forward.

Note

• Open the front cover gently. If you open it rapidly, the

bypass tray may open.

Open the top cover.

Note

• If the inner finisher is installed, be sure to remove any

output paper on it before opening the top cover.

Remove the print cartridge and place it on a
flat surface.

Note

• The print cartridge consists of the toner cartridge and

the image drum.

Cover the removed print cartridge with
paper so that it will not be exposed to light.

Front cover

Document
holder

Document holder
lever

Front cover

Front cover
open lever

Top cover

Print cartridge

Summary of Contents for E-studio 477s






















































































Search results

Summary of Contents for E-studio 477s

Reviews:

Toshiba E-studio 477s, User'S Manual And Troubleshooting Manual, Page: 8 / 86

Search results

Summary of Contents for E-studio 477s

Reviews: