e-STUDIO162/162D/151/151D UNPACKING AND INSTALLATION 5 - 8
5) When you are asked how the printer is connected, select "Con-
nected to this computer" and click the "Next" button.
6) When the interface selection screen appears, select "USB" and
click the "Next" button.
If you are using the machine as a shared printer on a network,
select "Connected via the network". For more information on this
setting, see "Using the machine as a shared printer".
Follow the on-screen instructions.
Caution: If you are running Windows 2000 and a warning message
appears regarding the Windows logo test or digital signature,
be sure to click "Yes".
7) You will return to the window of step 3). If you wish to install Button
Manager or Desktop Document Manager, click the "Utility Soft-
ware" button.
To install the Utility Software, see "Installing the Utility Software"
(steps 12) and 13) on page 7).
If you do not wish to install the Utility Software, click the "Close"
button.
A message will appear instructing you to connect the machine to
your computer. Click the "OK" button.
Note: After the installation, a message prompting you to restart your
computer may appear. In this case, click the "Yes" button to
restart your computer.
8) Make sure that the power of the machine is turned on, and then
connect the USB cable.
Windows will detect the machine and a Plug and Play screen will
appear.
9) Follow the instructions in the plug and play window to install the
MFP driver.
Follow the on-screen instructions.
Caution: If you are running Windows 2000 and a warning message
appears regarding the Windows logo test or digital signature,
be sure to click "Yes".
Note: A "USB 2.0 Composite Device" installation window may appear
prior to this procedure. In this case, follow the instructions in the
window to install the USB 2.0 Composite Device.
This completes the installation of the MFP driver.
• If you installed Button Manager, set up Button Manager as explained
in "C. Setting up button manager".
(3) Windows 95/98/Me/NT 4.0/2000 (Parallel)
1) The parallel cable must not be connected to the machine. Make
sure that the cable is not connected before proceeding.
If the cable is connected, a Plug and Play window will appear. If this
happens, click the "Cancel" button to close the window and discon-
nect the cable.
Note: The cable will be connected in step 10).
2) Perform steps 2) through 7) in "Custom installation".
3) Click the "MFP Driver" button.
To view detailed information on the software, click the "Display
Readme" button.
Note: In Windows 95/NT4.0, the "Utility Software" button does not
appear and only the printer driver can be installed.
4) The "Welcome" window will appear. Click the "Next" button.
5) When you are asked how the printer is connected, select "Con-
nected to this computer" and click the "Next" button.
If you are using the machine as a shared printer on a network,
select "Connected via the network". For more information on this
setting, see "Using the machine as a shared printer".
6) When the interface selection screen appears, select "Parallel" and
click the "Next" button.
e-STUDIO162_151.book 8
ページ
２００４年１２月２日 木曜日 午後９時３７分
Summary of Contents for e-studio 151
Page 170: ...Memo ...
Page 171: ...Memo ...
Page 172: ...Memo ...
Page 176: ...2 17 2 HIGASHIGOTANDA SHINAGAWA KU TOKYO 141 8664 JAPAN ...
