e-STUDIO162/162D/151/151D USER PROGRAM 12 - 2
B. Print mode
*
1
: The scanning speed increases when the USB 2.0 mode is set to "HI-SPEED", however, the printing speed does not increase considerably.
*
2
: When the 250-sheet paper feed unit is installed.
15
KEY TOUCH
SOUND
1: LOW
2: HIGH
3: OFF
• This sets the volume of beep signals.
16
SOUND AT
DEFAULT
1: ON
2: OFF
• Use this to sound a beep when a base setting is selected.
17
TONER SAVE
MODE
1: ON
2: OFF
• This mode reduces toner usage by about 10% when copying. Toner save mode is
effective when the exposure mode is AUTO or TEXT.
18
AE LEVEL ADJUST
1: ADF/RADF
2: DOCUMENT GLASS
• This is used to adjust the exposure level.
• The automatic exposure level can be adjusted separately for the document glass
and the ADF/RADF.
• The factory default setting for the exposure level is "center".
19
LANGUAGE
1: AMERICAN ENGLISH
2: ENGLISH
3: FRENCH
4: SPANISH
:
:
This is used to set the language used in the display.
20
RESET FACTORY
1: Yes
2: No
This is used to return all settings to the factory default settings.
21
SORT AUTO
SELECT
1: ON
2: OFF
Use this setting to enable or disable sort auto select mode.
Program
number
Program name
Setting codes
(factory default setting
appears in bold)
Explanation
Program
number
Program name
Setting codes
(factory default setting
appears in bold)
Explanation
1
FORCED OUTPUT
1: ON
2: OFF
When this function is enabled, printing in printer mode will automatically continue
using a different size of paper if the specified size of paper runs out in all trays. This
feature does not function in copy mode.
2
USB 2.0 MODE
SWITCH *
1
1: FULL-SPEED
2: HI-SPEED
This sets the USB 2.0 data transfer speed. To obtain the fastest speed when using
the USB 2.0 connector, first verify that your computer meets the system
requirements (operating system and driver), and then use this program to change
the USB 2.0 mode to "Hi-Speed". Note that the setting should not be changed while
running a TWAIN driver. (For the system requirements.)
3
AUTO TRAY
SWITCH*
2
1: ON
2: OFF
If the paper runs out during printing and there is paper of the same size in another
tray, this function automatically switches to that tray (excluding the bypass tray). The
function can be disabled.
e-STUDIO162_151.book 2
ページ
２００４年１２月２日 木曜日 午後９時３７分
Summary of Contents for e-studio 151
Page 170: ...Memo ...
Page 171: ...Memo ...
Page 172: ...Memo ...
Page 176: ...2 17 2 HIGASHIGOTANDA SHINAGAWA KU TOKYO 141 8664 JAPAN ...
