The Remote Control
Page 8-9
Controlling Other Components Using the AUX Button
Some additional features are available when the remote control is in the AUX mode.
Volume Control in AUX Mode
When the remote control is in TV, VCR, or SAT mode, the volume keys control the TV’s volume.
When the remote control is in AUX mode, the volume keys control the auxiliary device’s volume.
If your auxiliary device does not have audio output, you can program the volume keys to control
the TV’s volume when your remote control is in AUX mode by performing the following steps:
1) While holding down the
key, press the MUTE key. Then release both keys.
2) Press the “Volume Up” key.
Repeat these steps to restore volume control of your auxiliary device in AUX mode.
Assigning a Device to a Different Device Key
You can assign a device to a device key that has a different label. For example, you can assign a
second TV to the
key:
1) While holding down the
key, press the MUTE key. Then release both keys.
2) Press the device key associated with the type of device you wish to assign to the
key. In this example, you would press the TV key.
3) Enter the correct code. (To determine the code, use either the code scan or code entry
method described earlier.)
4) Press the
key. The new device code is now stored in the
key, and the
key now controls the second TV.
AUX
AUX
AUX
AUX
AUX
AUX
AUX
Summary of Contents for DST-3000
