Toshiba DST-3000 High Definition Digital Receiver
Page 7-12
VCR Setup
The
VCR SETUP
screen provides access to the
settings that will allow the DST-3000 receiver to
communicate the record and stop commands to your
VCR.
Brand
Using the and keys, search through the various
brands of VCRs that are supported. Related brands
that share the same control codes may be suggested.
You may want to experiment with these if you are
having difficulty finding a functioning code under
your VCR’s own brand name.
Code
More than one code may be assigned to your brand of VCR. Try each of the codes by using the
and keys to step through each code. Alternate between this procedure and testing the code.
Test (Record/Stop)
The testing function allows you to verify that the specified code will control your VCR. To run
the test, the VCR control cable must be properly attached (see “Setting Up Your Satellite
Receiver” in Chapter 2), a recordable tape must be in the VCR, and the VCR must be turned on.
Use the buttons on the front panel of the DST-3000 receiver (instead of the remote control) when
testing the codes, because signals coming from the remote control at the same time as signals
coming from the VCR control cable could give unreliable test results.
Be sure to test both the
Record
and the
Stop
commands, which are necessary for successful taping
capability. If either
Record
or
Stop
fails to function, try other codes associated with your VCR
brand. If you are unsuccessful in the test process after trying all available codes, recheck your
VCR control cable connections and IR emitter placement.
Scheduler
Highlighting the
Scheduler
button on the
MAIN
MENU
screen and pressing the
key on the
remote control will display the
SCHEDULER
screen
shown.
On the left are the buttons for Done and Video
explained immediately below:
Done
Highlighting the
Done
button on the screen and
pressing the
key on the remote control causes an
exit from the
SCHEDULER
screen and a return to the
MAIN MENU
screen.
Video
Highlighting the
Video
button on the screen and pressing the
key on the remote control
will return you to the last program you were viewing.
The VCR SETUP screen
▲
▲
▲
▲
The SCHEDULER screen
SELECT
SELECT
SELECT
Summary of Contents for DST-3000
