background image

Toshiba DST-3000 High Definition Digital Receiver

Page 7-8

TV Timer

Highlighting the 

TV Timer

 button on the 

LIMITS

 

screen and pressing the 

 key on the remote 

control will display the 

TV TIMER

 screen.

From the 

TV TIMER

 screen you can specify the 

hours that satellite programming can be viewed on 
your receiver, which is done by highlighting each of 
the days you wish to control and pressing 

After selecting a day of the week, you can set an 
acceptable start and end viewing period 

or

 a total 

viewing duration. 

Rating Help

Program ratings indicate the suitability of a 
program’s content for a given audience. For families 
with younger children, a lower rating limit may be 
desirable. Other families may choose to allow 
viewing of more sophisticated programming.

Highlight the 

Rating Help

 button and press 

 to 

display the 

RATING HELP

 pop-up menu. Use the  

 and   keys to view information about the age-based 

rating and content themes listed in the menu. The 
table below provides more detail about the ratings.

Rating

Description

TV-MA

Mature Audience Only. Specifically designed to be viewed by adults and may be 
unsuitable for children under 17. It contains one or more of the following content 
themes: 

crude, indecent language (L), explicit sexual activity (S), or graphic 

violence (V).

TV-14

Parents Strongly Cautioned. Contains some material that many parents would find 
unsuitable for children under 14. Parents are strongly urged to exercise greater care 
in monitoring this program and are cautioned against letting children under the age 
of 14 watch unattended. This program contains one or more of the following 
content themes: 

intensely suggestive dialogue (D), strong, coarse language (L), 

intense sexual situations (S), or intense violence (V).

TV-PG

Parental Guidance Suggested. Contains material that parents may find unsuitable 
for younger children. Many parents may want to watch it with their younger 
children. The program contains one or more of the following content themes: 

some 

suggestive dialogue (D), infrequent coarse language (L), some sexual 
situations (S), or moderate violence (V).

TV-G

General Audience. Most parents would find this program suitable for all ages. It 
contains 

little or no sexual dialogue (D), no strong language (L) or sexual 

situations (S), and little or no violence (V).

The TV TIMER screen

SELECT

SELECT

The RATING HELP pop-up panel

SELECT

Summary of Contents for DST-3000



































































































Reviews: