Firmware Update Procedure for R-N602
IMPORTANT NOTICE
Follow the instructions carefully and do not attempt any other procedures not specified in the instructions
provided by Yamaha. Improperly updated products may cause improper operation, and any parts or service
required to restore proper operation will not be covered under the Yamaha Limited Warranty.
[ Firmware Update by USB ]
Requirements:
・
USB thumb drive, with enough free space to store the firmware.
(File system with FAT16 or FAT32 format)
・
Firmware file provided by Yamaha.
(Unzip program file and BIN file will appear. Copy the BIN file to the root directory of an USB drive.)
STEP 1
Turn off the unit.
STEP 2
Insert the USB thumb drive on the front panel.
STEP 3
While holding down
RETURN
on the front panel, press power.
STEP 4
“
ADVANCED SETUP
” will be shown for seconds.
STEP 5
Rotate
SELECT/ENTER
to select firmware update mode as shown below.
STEP 6
Press
DISPLAY
to start the update.
note:
DO NOT
interrupt the power or press any buttons during the update.
In case the power is accidentally cut off, the R-N602 will restore original firmware. Perform the
update procedure from STEP 1 again.
Update is completed when “
UPDATE SUCCESS
”, “
PLEASE…
”, “
POWER OFF!
” is
displayed alternately. Then, power off the unit.
UPDATE
・・・・・
USB
DIMMER
