Toshiba 5520 Management Manual Download Page 94

Page: 94 / 202

2 SETTING ITEMS (ADMIN)

92 Setting Network Functions

Continue to another network setting if required, then press [APPLY NOW].

The “NETWORK INITIALIZING” message is displayed and this equipment starts initializing the network interface
card to apply the changes.

If Duplicate Address Detection (DAD) detects duplicate addresses, the message “IPv6 ADDRESS CONFLICT” is
displayed on the touch panel.

Setting the IPv6 protocol automatically (in a stateful network environment)

Press [NETWORK] in the ADMIN menu.

The NETWORK menu is displayed.

To display the ADMIN menu, see the following page:

P.63 “Entering Admin Menu”

Press [IPv6].

The IPv6 screen is displayed.

Summary of Contents for 5520











































































































































































































Search results

Summary of Contents for 5520

Reviews:

Related manuals for 5520

Brands by name

Popular brands

Toshiba 5520, Management Manual

Search results

Summary of Contents for 5520

Reviews:

Related manuals for 5520

Brands by name

Popular brands