Toshiba 5520 Management Manual Download Page 146

Page: 146 / 202

2 SETTING ITEMS (ADMIN)

144 IEEE 802.1X Authentication Setting

Confirm the settings and press [APPLY NOW].

The “NETWORK INITIALIZING” message is displayed and this equipment starts initializing the network interface
card to apply the changes.

Error messages

The following error messages may be displayed on the touch panel.

Message

Cause

[802.1X] Auth Server/Switch couldn’t be contacted

The RADIUS server service is stopped.

Configuration for the RADIUS server is not correct.

The IEEE 802.1X switch has problem.

[802.1X] Authentication failed

The username or password that the user entered is not
correct.

The certificates uploaded are wrong.

[802.1X] Falling back to non-802.1X mode

Network communication has begun using the fall back function,
ignoring IEEE 802.1X authentication.

Summary of Contents for 5520











































































































































































































Search results

Summary of Contents for 5520

Reviews:

Related manuals for 5520

Brands by name

Popular brands

Toshiba 5520, Management Manual

Search results

Summary of Contents for 5520

Reviews:

Related manuals for 5520

Brands by name

Popular brands