66
Setting up your TV
How to navigate the menu
3
Press the ( / arrow) buttons to select
Home
.
4
Press the
OK
button.
ANT/CABLE In
This setting configures the antenna input source for the
ANT/CABLE terminal.
1
Press the
MENU
button.
2
Select
SETTINGS
,
SETUP
, and then
ANT/CABLE In
.
3
Select
Antenna
or
Cable
and press
Next
.
4
Select
Cable
and press
Next
.
If you do not want to scan channels, you do not need to make a
selection for ANT/CABLE. Select
Next
and press
OK
to skip this
step.
5
Select
Start Scan
.
After scanning is complete, the auto tuning results screen will
appear.
6
Press
OK
or
EXIT
.
Storing channels in memory (optional)
To make sure your TV stops only on the channels you want when
you press the
CH Up/Down
arrow buttons on the remote control or
the control panel, store those channels in the TV’s memory.
Auto Tuning
You must set up the antenna/cable input source first. See
“Initial
setup” on page 51
.
You can set up the TV to detect all active channels in your area and
store them in its memory. Then you can manually store or skip
individual channels from memory.
Option:
Description:
Cable
Note: If you select Cable, auto tuning deletes previously stored
channels from memory.
This setup requires some time, but you do not need to repeat the
setup unless your cable TV service’s lineup changes significantly.
NOTE
NOTE
