32
Connecting Your TV
Connecting remote IR devices
❖
If your DVD player or satellite receiver does not have
component video, connect a standard A/V cable to the
AUDIO/VIDEO
terminal. If your DVD player has HDMI
®
video, see
“Connecting an HDMI® or DVI device to the
HDMI® input” on page 35
.
When you use ColorStream
®
HD or Video, please switch to the
appropriate AV mode.
To view antenna or Cable channels:
Select the
ANT/CABLE
video input source on the TV.*
To view the DVD player:
Turn ON the DVD player. Select the
ColorStream
®
HD video
input source on the TV.*
To view satellite programs using the component video
connections:
Turn ON the satellite receiver. Select the
ColorStream
®
HD video
input source on the TV.*
To view the VCR or view and record antenna channels:
Turn ON the VCR. Tune the VCR to the channel you want to
watch. Select the VIDEO video input source on the TV.*
To record a TV program while watching a DVD:
Turn ON the VCR. Tune the VCR to the channel to record. Select
the ColorStream
®
HD video input source on the TV* to view the
DVD.
*To select the video input source, press the
INPUT
button on the
remote control, see
“Selecting the video input to view” on page 86
.
The unauthorized recording, use, distribution, or revision of
television programs, videotapes, DVDs, and other materials is
prohibited under the Copyright Laws of the United States and other
countries, and may subject you to civil and criminal liability.
Connecting remote IR devices
Using the IR blaster OUT terminal
You can use the TV’s IR OUT terminal to remotely operate many
infrared remote-controlled devices enclosed in an entertainment
center or similar cabinet.
Items needed:
NOTE
NOTE
