Toro Multi Pro ExcelaRate 5800-G, Operator'S Manual

Page: 59 / 88

g032542
Figure 72
1. Screws (#10 x 3/4 inch) 7. 2-socket connector (fuel
pump/sending unit)
2. Cover 8. Nut (fuel pump/sending
unit)
3. Fuel tank 9. Seal
4. 2-socket connector
(machine—wiring
harness) 10. Fuel-hose coupling
5. 2-pin connector (fuel
pump/sending unit) 11. Fitting (fuel pump)
6. 2-pin connector
(machine-wiring harness)
3. Disconnect the 2-socket connector of the
machine-wiring harness from the 2-pin
connector of the fuel pump/sending unit;
disconnect the 2-pin connector of the
machine-wiring harness from the 2-socket
connector of the fuel pump/sending unit (
Figure
72 ).
4. Slide the locking sleeve of the fuel-hose coupling
away from the fitting of the fuel pump/sending
unit and remove the coupling and hose from the
fitting (
Figure 72 ).
Note:
Clean up any fuel that flows from the
hose coupling or fuel-pump fitting.
5. Rotate the nut for the fuel pump/sending unit
counterclockwise and remove the nut and seal
(
Figure 72 )
6. Carefully lift and rotate the fuel pump/sending
unit out of the neck of the fuel tank (
Figure 73 ).
Important:
Use caution when handling the
fuel pump/sending unit to avoid damaging
the arm for the float of the sending unit.
g032543
Figure 73
1. Fuel-tank neck 4. Fuel pump/sending unit
2. Arm (sending-unit float) 5. Filter
3. Pickup tube (fuel filter) 6. Float
59