Maintenance
Recommended Maintenance Schedule(s)
Maintenance Service
Interval
Maintenance Procedure
After the first 5 hours
• Replace the hydraulic-fluid filters.
After the first 8 hours
• Torque the wheel-lug nuts.
• Change the rear planetary-gearbox fluid.
• Check the fan/alternator belt.
After the first 50 hours
• Change the engine oil and oil filter.
• Check the fuel lines and connections.
After the first 200 hours
• Pack the front wheel bearings.
Before each use or daily
• Check the tire pressure.
• Check the brakes.
• Clean the suction strainer.
• Check the tank straps.
• Check the air cleaner.
• Check the engine oil.
• Check the coolant level.
• Check the hydraulic-fluid level.
Every 50 hours
• Lubricate the pump.
• Lubricate all grease fittings.
• Check the battery-cable connections.
Every 100 hours
• Lubricate the boom hinges.
• Replace the air-filter element.
• Torque the wheel-lug nuts.
• Inspect the condition and wear of the tires.
• Check the cooling-system hoses for wear and damage.
• Check the fan/alternator belt.
Every 200 hours
• Change the engine oil (including synthetic oil) and oil filter.
• Check front wheel toe-in.
• Inspect all hoses and connections for damage and proper attachment.
• Clean the radiator fins.
Every 400 hours
• Grease the actuator-rod bearings.
• Complete all yearly maintenance procedures specified in the engine operator's
manual.
• Check the fuel lines and connections.
• Service the fuel filter.
• Drain and clean the fuel tank.
• Pack the front wheel bearings.
• Change the planetary-gearbox fluid.
• Check the coolant (as directed by the manufacturer) and change if necessary.
• Replace the hydraulic-fluid filters.
• Change the hydraulic fluid.
• Inspect the O-rings in the valve assemblies.
• Change the pressure filter.
• Inspect the pump diaphragm and replace if necessary.
• Inspect the pump check valves and replace if necessary.
• Inspect the pivot bushings.
Every 1,000 hours
• Check the PCV valve.
Yearly
• Flush the sprayer with clean water.
• Calibrate the agitation-bypass valve.
48
Summary of Contents for Multi Pro ExcelaRate 5800-G
Page 73: ...Spray System Schematic g034336 Figure 92 73...
Page 86: ...Notes...
Page 87: ...Notes...
